Geocel Gun Grade Expanding Foam (750ml)
€13.07 VAT incl.
Moisture curing, polyurethane foam suitable for gap filling around door and window frames.
- Suitable for gap filling around window
- Expands and moulds itself to surface irregularities
- Can be cut, sawn, sanded, painted or plastered over
- For use with a foam gun
How to use
- Remove loose particles and dust, surfaces should also be free of oil and grease
- Mask areas to avoid unwanted contamination of surrounding substrates
- Moisten surfaces with water
- Wear gloves and protective eyewear during use
- Shake can well before use
- Carefully screw the can onto the foam gun ensuring not to tilt or overwind the can
- Operate the gun’s trigger immediately in order to fill the gun body with foam
- Adjust the gun to the required bead width using the metering screw
- Foam is dispensed by pulling the trigger. Note: the can should only be used in an upside-down position.
- Always leave the can on the gun when not in use, and ensure that the metering screw is tightly closed
- Immediately replace an empty can with a new one
- The tip of the gun must always be cleaned thoroughly with gun cleaner prior to storing to prevent clogging
If material is unlikely to be used for a period in excess of 4 weeks, the gun should be purged using gun cleaner. Gun cleaner should never be left on a gun once cleaning has been completed.
Additional information
| Volume | 750ml |
|---|